Enercon: The simplest
programming full featured battery powered controller available on
the market. System cost 30-40% less than the competition.
Irrigation
Controller (Lithium battery-operated)
The controller shall
be a solid state irrigation controller powered lithium batteries.
The vandal and water resistant controller is enclosed in a powder
coated, commercial grade metal enclosure. A stainless steel enclosure
or pedestal is also available to house said controller. The panel
has an easy to read display rated for high temperatures up to
158 degrees Fahrenheit. The controller shall operate in an outdoor
setting (in extreme heat or cold) and power latching solenoid
actuators. The Enercon can operate valves up to 3,000 feet (6,000
foot loop) with 12 gauge or 2,000 feet (4,000 foot loop) with
14 gauge irrigation wire. If the SSPED Stainless Steel Pedestal
is specified then the galvanized pipe is not applicable.
ENERCON
4 & 8 Features and Advantages:
Four or
eight stations plus master valve.
Up to
five year battery life and low battery voltage indicator.
Batteries
included.
2000 foot
valve operating distance with 14 gauge wire and 3,000 foot valve
operating distance with 12 gauge wire.
Functions
and stations rotary switch programming.
Self powered
removable panel for programming at a convenient location.
Two independent
programs, 4 starts per day per program.
Automatic,
semi-automatic, and timed manual operation.
Water
budget function in 10% increments from 10-200% and monthly budgeting
available.
Valve
test function (invented by Alex-Tronix in 1977).
Watering
based on days of the week or interval of days.
Rain delay
function up to 99 days.
Watering
up to 23 hours and 59 minutes in one minute increments.
Adjustable
delay between stations.
Powder
coated outdoor metal case with lock. Pedestal mounting capability.
Optional
stainless steel case or pedestal.
Long life
battery operation allows installation anywhere in the world.
Easy to
read high temperature rated liquid crystal display.
Power failure
proof and electrically safe installation and troubleshooting.
Pulsed
power eliminates burned out coils due to excessive voltage.
Optional
latching relay allows operation of lights, pumps, or other industrial
controls.
Pulsed
DC current eliminates capacitive coupling problems associated
with AC powered systems and galvanic copper wire deterioration
of steady DC operation.
Technology
recognized and sponsored by the U.S. Department of Energy for
energy efficiency.
100% burned
in and functionally tested.
Patented
design.
Two year
warranty on controller and batteries.
Electrical
Specifications:
Electronics
current in idle state: 30 microamps
Electronics current while programming: 3 milliamps
Electronics power: 4400 milliamphours
Valve power: Three 9 volt lithium batteries in series, 1200 milliamphours
Mechanical
Specifications:
Standard and SSE Stainless Steel Enclosure size:
8.25 x 7.5 x 5.2 inches, 21.0 x 19.0 x 13.2 cm
Weight: 8.0 lb, 3.6 Kg
SSPED Stainless Steel Pedestal Size:
35.5 x 7.5 x 5.25 inches, (91 x 19 x 13 cm)
Weight: 23 lb (10.5 Kg)
